Tue Jan 10, 2006 10:08 pm TE Reverse Throwback Screen
BTW Ark, this is a serious GPS Submission, I hope you have room for another trick play 
To Create The Formation (J-Form - Twin TE)
1) First and foremost you must add the "WR Reverse Pass" Play from the "Singelback - Normal" Formation. I have confirmed this play is in Madden 04, 05, and 06, in the Philadelphia PB. (Chicago in 05, and in 06 Cincinnati also)
Note: Add any other plays you want here, b/c you cannot go back to get more after you edit the formation.
2) Edit it to look like the formation below like this:
~ moving the slot reciever (WR3) to TE (The one on the LOS)
~ Leaving WR1 where he is
~ moving the HB to FB
~ WR2 to TE (farthest away from center)
~ And Finally the Original TE to HB1.
Follow the below Diagram:
E = TE
W = WR
H = HB
F = FB
Q = QB
TE makes no real difference which is which, just make the better run blocker the one on the LOS, and the more athletic one the one off the LOS.
The Play
Pretty Simple to make.....
NOTE: DO NOT EDIT THE QB, HB, and the TE (who receives the reverse). Leave their routes alone, once edited, you have to start over!!!!
HB1 - 4W, end curl RT
QB - DO NOT CHANGE
FB - DO NOT CHANGE
WR1 - No big deal here, just keep him away from the left side of the feild, I just left his route alone.
TE - Leave the one recieving the Reverse alone, the one on the LOS make him Screen Block Left
LT, LG - Screen Block Left
C, RG, RT - Leave the way they are.
Running the Play
Snap the ball and let the Reverse unfold, run around to the right with the TE and cut into the open field if there is space (Do not hit the sprint button until you pass the LOS or it will go into passing mode) If there are defenders in the area, use the QB as a lead blocker and to protect you (If he can keep up) and when the D commits to going after you throw it back accross the field to your HB who will have blockers ahead of him for hopefully a big gain.
Pros
~ Very fun play to run.
~ Not that risky ( When i tested this out on All-Pro against the Ravens I only turned it over once when a defender jumped through the line and intercepted it, otherwise the HB was wide open 99% of the time)
~ Valuable near the Goalline, force the defense to bte on the run and if they do, toss it back to the RB, if they don't bite on the run it is an easy TD.
~ Big play potential, if the blockers get their men, no one will be in a position to tackle you.
~ Unlike my last play I made, the QB will block for you instead of stand there, and so will the FB, who will seal off the back door after he hands it off.
Cons
~ As with all passes thrown by a non-QB it will not be that accurate .
~ If the HB drops the pass thrown backwards it could result in a fumble, but throw it earlier to avoid this.
~ Because of the TE's low throwing power, most often it will be a lob, which will give the D plenty of time to react.[/b]
So what do you guys think of this, eh?
To Create The Formation (J-Form - Twin TE)
1) First and foremost you must add the "WR Reverse Pass" Play from the "Singelback - Normal" Formation. I have confirmed this play is in Madden 04, 05, and 06, in the Philadelphia PB. (Chicago in 05, and in 06 Cincinnati also)
Note: Add any other plays you want here, b/c you cannot go back to get more after you edit the formation.
2) Edit it to look like the formation below like this:
~ moving the slot reciever (WR3) to TE (The one on the LOS)
~ Leaving WR1 where he is
~ moving the HB to FB
~ WR2 to TE (farthest away from center)
~ And Finally the Original TE to HB1.
Follow the below Diagram:
.......EOOOOO.......W ......E...Q.......... ..................... ............F........ .........H........... .....................
E = TE
W = WR
H = HB
F = FB
Q = QB
TE makes no real difference which is which, just make the better run blocker the one on the LOS, and the more athletic one the one off the LOS.
The Play
Pretty Simple to make.....
NOTE: DO NOT EDIT THE QB, HB, and the TE (who receives the reverse). Leave their routes alone, once edited, you have to start over!!!!
HB1 - 4W, end curl RT
QB - DO NOT CHANGE
FB - DO NOT CHANGE
WR1 - No big deal here, just keep him away from the left side of the feild, I just left his route alone.
TE - Leave the one recieving the Reverse alone, the one on the LOS make him Screen Block Left
LT, LG - Screen Block Left
C, RG, RT - Leave the way they are.
Running the Play
Snap the ball and let the Reverse unfold, run around to the right with the TE and cut into the open field if there is space (Do not hit the sprint button until you pass the LOS or it will go into passing mode) If there are defenders in the area, use the QB as a lead blocker and to protect you (If he can keep up) and when the D commits to going after you throw it back accross the field to your HB who will have blockers ahead of him for hopefully a big gain.
Pros
~ Very fun play to run.
~ Not that risky ( When i tested this out on All-Pro against the Ravens I only turned it over once when a defender jumped through the line and intercepted it, otherwise the HB was wide open 99% of the time)
~ Valuable near the Goalline, force the defense to bte on the run and if they do, toss it back to the RB, if they don't bite on the run it is an easy TD.
~ Big play potential, if the blockers get their men, no one will be in a position to tackle you.
~ Unlike my last play I made, the QB will block for you instead of stand there, and so will the FB, who will seal off the back door after he hands it off.
Cons
~ As with all passes thrown by a non-QB it will not be that accurate .
~ If the HB drops the pass thrown backwards it could result in a fumble, but throw it earlier to avoid this.
~ Because of the TE's low throwing power, most often it will be a lob, which will give the D plenty of time to react.[/b]
So what do you guys think of this, eh?
