Wed Feb 09, 2005 11:54 pm Bravo
I've become a fan of Joe Gibbs as of late. I tried incorporating some of his style into a custom playbook on Madden '04, and found it worked pretty well. So here's a formation I call Bravo, and one of my bread-and-butter plays from it.
Instructions
1. Add a play-action pass from the Singleback-Normal formation, where the fake handoff is on the right side.
2. Edit the Singleback-Normal formation as follows.
Change the TE1 to FB1.
Bring the WR2 (the one farthest to the left) to the left wing, as shown above, and change him to TE1.
Change WR3 to WR2.
Bring WR1 in to the position shown above.
Why the FB placed in a TE spot? Well, most importantly, your starting Fullback is more likely to be a better athlete than your backup Tight End. Since this formation calls for that position to be able to run block, pass protect, and catch effectively, you want the better football player out there. Secondly, due to the way the game assigns blocking, the player in that position usually has to block the defense's LE one-on-one on running plays, while the tackle on that side immediately attempts to get to the second level. I've done a lot of testing, and the game just doesn't like the TE vs. DE matchup, and you'll usually end up having the TE pushed back 5 yards by the time the back has the ball (one of the myriad reasons why outside running is so hit or miss). For some reason a FB in that spot just matches up better. Thirdly, it gives you a personnel package of 2 RB's, 1 TE, and 2 WRs - the same as a normal garden variety I-Form. Obviously, someone expecting a more vanilla-looking formation will have to re-think things once you're set up at the line.
PA Burst
[image unavailable]
After you're done laughing at that image, open up the PA play you've added in the editor.
*Important* Don't touch the quarterback's assignment, or you'll risk breaking the Play-action
O-Line and FB - Pass Block
WR2 - (Cut 45 Right) - N2 - N3E6 - End/Get Open
TE - N1W1 - N2 - (Cut 90 Left) - W5 - End/Get Open
HB - N3E1 - N1 - (Cut 90 Right) - E5 - End/Get Open
WR1 - (Cut 45 Right) - N10 - End/Get Open
Execution.
This play is designed to be run with the Flanker (WR1) in mortion to the left. Snap the ball once he's past the TE. The QB fakes the handoff, and the HB goes through the hole, then breaks for the right flat. The two WRs and TE on the left deploy, and briefly run upfield in tight formation, before breaking off in different directions. The TE heads to the left flat, the SE crosses the field, and the Flanker streaks down the field. This play floods zone and confuses man, and that combined with the play action fake is usually good enough to spring someone. Reads are simple, and go from left to right.
1. TE Out
2. Flanker Streak
3. SE Cross
4. HB Out
The TE Out is about the closest thing you can have to a sure thing in football. Very few defenses I've come across in my testing will take it away from you. The cover 2 comes close, as does a LB breaking to the flat, but it usually requires a horrible throw combined with a superhuman play to break it up/pick it off... but then again, this is Madden, so watch out for that. Any time the Safety on the left side isn't playing deep, or against the Cover 2, that usually means you'll have one-on-one deep on the Flanker Streak, and you'll want to try to take advantage of that. Sometimes though, the routes and the fake will combine to make a little magic happen, and the Flanker will have about an acre all to himself. When the middle of the field opens up, the SE's crossing route is a good option. The HB Out works well as a hot route, since if the QB needs to get rid of the ball quickly, the defense has probably ignored the HB anyway. The TE and HB routes make for some interesting rollout opportunities, both left and right, for you Vick-o-philes out there.
Weaknesses:
It's still a PA Pass play, so your protection will be inconsistent at best, and nonexistent at worst. Also, if the HB gets tackled, then you won't have his route to bail you out if you need it.
Give it a try, and let me know what you think. Be gentle
....S...OOOOOU....... .......T..Q.....F.... ..................... ..................... ..........H.......... .....................
Instructions
1. Add a play-action pass from the Singleback-Normal formation, where the fake handoff is on the right side.
2. Edit the Singleback-Normal formation as follows.
Change the TE1 to FB1.
Bring the WR2 (the one farthest to the left) to the left wing, as shown above, and change him to TE1.
Change WR3 to WR2.
Bring WR1 in to the position shown above.
Why the FB placed in a TE spot? Well, most importantly, your starting Fullback is more likely to be a better athlete than your backup Tight End. Since this formation calls for that position to be able to run block, pass protect, and catch effectively, you want the better football player out there. Secondly, due to the way the game assigns blocking, the player in that position usually has to block the defense's LE one-on-one on running plays, while the tackle on that side immediately attempts to get to the second level. I've done a lot of testing, and the game just doesn't like the TE vs. DE matchup, and you'll usually end up having the TE pushed back 5 yards by the time the back has the ball (one of the myriad reasons why outside running is so hit or miss). For some reason a FB in that spot just matches up better. Thirdly, it gives you a personnel package of 2 RB's, 1 TE, and 2 WRs - the same as a normal garden variety I-Form. Obviously, someone expecting a more vanilla-looking formation will have to re-think things once you're set up at the line.
PA Burst
[image unavailable]
After you're done laughing at that image, open up the PA play you've added in the editor.
*Important* Don't touch the quarterback's assignment, or you'll risk breaking the Play-action
O-Line and FB - Pass Block
WR2 - (Cut 45 Right) - N2 - N3E6 - End/Get Open
TE - N1W1 - N2 - (Cut 90 Left) - W5 - End/Get Open
HB - N3E1 - N1 - (Cut 90 Right) - E5 - End/Get Open
WR1 - (Cut 45 Right) - N10 - End/Get Open
Execution.
This play is designed to be run with the Flanker (WR1) in mortion to the left. Snap the ball once he's past the TE. The QB fakes the handoff, and the HB goes through the hole, then breaks for the right flat. The two WRs and TE on the left deploy, and briefly run upfield in tight formation, before breaking off in different directions. The TE heads to the left flat, the SE crosses the field, and the Flanker streaks down the field. This play floods zone and confuses man, and that combined with the play action fake is usually good enough to spring someone. Reads are simple, and go from left to right.
1. TE Out
2. Flanker Streak
3. SE Cross
4. HB Out
The TE Out is about the closest thing you can have to a sure thing in football. Very few defenses I've come across in my testing will take it away from you. The cover 2 comes close, as does a LB breaking to the flat, but it usually requires a horrible throw combined with a superhuman play to break it up/pick it off... but then again, this is Madden, so watch out for that. Any time the Safety on the left side isn't playing deep, or against the Cover 2, that usually means you'll have one-on-one deep on the Flanker Streak, and you'll want to try to take advantage of that. Sometimes though, the routes and the fake will combine to make a little magic happen, and the Flanker will have about an acre all to himself. When the middle of the field opens up, the SE's crossing route is a good option. The HB Out works well as a hot route, since if the QB needs to get rid of the ball quickly, the defense has probably ignored the HB anyway. The TE and HB routes make for some interesting rollout opportunities, both left and right, for you Vick-o-philes out there.
Weaknesses:
It's still a PA Pass play, so your protection will be inconsistent at best, and nonexistent at worst. Also, if the HB gets tackled, then you won't have his route to bail you out if you need it.
Give it a try, and let me know what you think. Be gentle